If you want to renovate the interior decor of your home and offices, you may need to consider many aspects. One of the important factors if you are redecorating your home is the change of outdated carpet. Whether you need to pull carpet up because of wear and tear or you want to vacuum them. It takes time because it involves certain steps so that you can pull the carpet up easily without damaging it.
If you’re tired of seeing the same carpet at your places or want a new one, you might need the old carpet to pull up. Sometimes they can get stuck to your floor, you can follow these steps to pull the carpet up and other types of flooring. Start by taking apart the tack strips that hold the carpet to the floor. These pieces are secured to the floor with staples, nails, residue, or glue. Once you’ve removed these, you can use pliers to grasp the fibers and pull them out of the flooring. It may also be necessary to cut them where they stick out.
Easy Ways To Pull Carpet Up Without Damaging
We have mentioned the easy steps for pulling carpets in this guide, so now you don’t need to worry at all. Let’s dive in to know about the essential steps to pull the carpet up, have a look at them;
1. Grab the Needed Tools
To remove the carpet from the floor you will need certain types of equipment as follows:
- Pliers
- Crowbar
- Pry Bar
- Utility Knife
- Hammer
- Staple Remover
2. Remove The Baseboard First
The first working step in pulling up your carpet is to remove the baseboard. If the baseboard is attached to the wall, you can simply pry it up using the pry bar. If you’re pulling up the carpet, you’ll need to move the baseboard away before you pull it up. Make sure to wear a mask if you’re sensitive to dust. For more control, grab a corner and roll the carpet up. Once the floor is free, you’ll need to remove the baseboard.
3. Remove Metal Tack Strips Or Staples
To pull the carpet up you’ll need to remove any metal tack strips or staples that are holding it to the floor. These can be easily removed using pliers and a small crowbar. Once you’ve done this, you can use pliers to loosen the carpet from the tack strip. After removing the tack strips, you can cut and roll the old carpet back.
4. Use Mask & Gloves Before Pulling The Carpet
If you’re sensitive to dust, you may need to put on a mask and gloves before you begin pulling the carpet. You can also use eyewear if you are allergic to the dusty atmosphere. Start by grabbing a corner of the carpet and lifting it with your hands. Next, take a utility knife and cut a 6-inch square out of the corner. You’ll need to roll the pieces together to get them out of the way. Do not pull up the metal transition! After you’ve lifted the carpet, clean up any residue with a hose.
5. Begin The Removal Process
After you’ve removed the tack strip, you can begin the pull the carpet up process. You’ll need a working glove and pliers. Once you’ve got a hold of the edge, lift the rest of the carpet by hand. If you’re dealing with a large section of carpet, you’ll need a second person to help you pull it up. If you’re working with a small area, you may need to separate the carpet into strips. If you’re working with a large area, you’ll want to start at one corner and work your way towards the opposite wall.
6. Start At One Corner And Pull It Up From There
Wear work gloves when you’re pulling up the carpet. Then, start at one corner and pull the carpet up from there. You may also need an assistant to help you lift the other corner. Then, cut it into strips and discard them. You may want to leave the metal transition alone. Then, work your way around the opposite wall. Once you’ve removed the entire piece, you’re ready to go on to the next step.
7. Use Pliers To Remove The Carpet Pad
When pulling up a carpet, it is best to start at the corner. It’s important to use pliers to remove the carpet pad before continuing. Some floors do not have a vapor barrier underneath, so you can try removing it as well. The first step involves removing the carpet pad. Once you’ve removed the pad, cut it into strips and discard it. It’s very easy to remove a pad, but it should be lightweight and easy to handle so that it won’t make you exhausted.
8. Call Your Local Dump To Take It To A Landfill
After you’ve removed the carpet, you should call your local dump to take it to a landfill. The dumps charge a different price for used carpets. Before you dispose of the old material, make sure you remove the staples with pliers. Then, use a crowbar to pull the carpet. As you can see, there are several ways to pull the old carpet up. Once you’ve nailed it in, you can begin the next phase: vacuuming the old carpet.
To Wrap Up!
If you’ve been told that you need to pull the carpet up to inspect it, you can start by gathering the tools for removing the carpet. Then, you should use pliers to rip apart the top section and the bottom riser and use the pliers to lift the remaining section. After that, you should carefully vacuum the old carpet so that you don’t have to worry about any staples. You can then proceed to remove the old carpet.
When you need to remove the carpet, you can use a crowbar to pry up the metal nosing. After you’ve removed the staples, you can pull up the rest of the carpet. Once you’ve lifted the top riser, you can use pliers to pry up the rest of the carpet. Then, you can pull up the remaining sections of the carpet. While a crowbar can help you with some of these tasks, it’s best to use a crowbar to help you get the job done.
